AMT-ACAuxiliary Measurement Tool
|
PART No: 16000 – 4603
DESCRIPTION
A tension and compression sensor for standard tool strings and for pipe assisted logging. This tool can also provide a reading for well bore hydrostatic pressure. AMT measurements can be displayed to a laptop on the rig floor via wireless.
SPECIFICATIONS
Parameter |
English |
Metric |
Pressure |
20,000 PSI |
1,379 bar |
Temperature |
350° F |
177° C |
Weight |
80 lbs |
36.28 kg |
Tool Length |
3.39 ft |
1.03 cm |
Transport Length |
5.20 ft |
1.58 m |
Tool OD |
3.625 in |
9.2 cm |
1 From end of top thread protector to end of bottom thread protector. |
COMBINABLE WITH
The AMT-AC must be stacked above the Gamma Ray/Spectral Gamma Ray (GRT) tools.
For information on Parts, Test, Calibration and Accessory equipment available for the AMT-AC, contact your Tucker Technologies Technical Sales Representative.
LOGGING PARAMETERS
Parameter |
English |
Metric |
Measurement Range: |
Pressure |
0 – 20K PSI |
Tension |
0 – 10,000 lbs |
Compression |
0 – 10,000 lbs |
Maximum Logging Speed |
60 ft/min |
18.3 m/min |
Borehole Ranges: |
Minimum |
4.75 in |
12.07 cm |
Maximum |
22 in |
56 cm |
BOREHOLE ENVIRONMENT
Open, cased, fluid- or air-filled holes. |