PART No: 10710 – 4602
DESCRIPTION
The four-arm CCT provides tool centralization and borehole diameter values.
SPECIFICATIONS
Parameters |
English |
Metric |
Pressure |
20,000 PSI |
1,379 bar |
Temperature |
350° F |
177° C |
Weight |
105 lbs |
48 kg |
Tool Length |
7.52 ft |
2.29 m |
Transport Length |
9.33 ft |
2.84 m |
Tool OD |
Housing Diameter |
3.11 in |
7.90 cm |
Expanded Bow String |
16 in |
40.64 cm |
1 From end of top thread protector to end of bottom thread protector. |
COMBINABLE WITH
The CCT is combinable with all TTI open hole tools. It may be placed anywhere below the Gamma Ray/Spectral Gamma Ray tools (GRT) and above the Phased Induction Tool (PIT).
REMARKS
The CCT is calibrated using a using a set of rings with inside diameters of 8" and 14". Typical application for the CCT is to run in combination with the Compensated Sonic Tool (CST).
For information on Parts, Test, Calibration and Accessory equipment available for the CCT-AA, contact your Tucker Technologies Technical Sales Representative
LOGGING PARAMETERS
Parameter |
English |
Metric |
Vertical Resolution – Caliper |
8 in |
20.32 cm |
Measurement Range:
Caliper (PDT) 3.625 in to 16 in (9.2 cm to 40.6 cm) |
Maximum Logging Speed |
120 ft/min |
37 m/min |
Repeatability
Caliper |
±0.2 in, ±5.1 mm |
Borehole Ranges: |
Minimum |
4.2 in |
10.7 cm |
Maximum |
16 in |
40.6 cm |
BOREHOLE ENVIRONMENT
Open, cased, fluid- or air-filled holes.