SACT-AB
Borehole Measurement Six Arm Caliper Tool
SACT-AB
Six Arm
Caliper Tool

SACT-AB.png

 
SACT-AB
Six-Arm Caliper Tool
Presentation

SACT-AB Presentation.png

 

PART No: 10880 – 4601

DESCRIPTION

Six articulated arms measure an electrical signal directly proportional to the expansion of the caliper arms to measure borehole size. All six arms are completely independent resulting in six radii readings. Produce diameter results by adding opposite radii values.
 

SPECIFICATIONS

Parameters
English
Metric
Pressure
20,000 PSI
1,379 bar
Temperature
350° F
177° C
Weight
212 lbs
96.2 kg
Length
7.84 ft
2.39 m
Transport Length1
9.66 ft
2.94 m
Tool OD (arms closed)
4.27 in
10.85 cm
1 From end of top thread protector to end of bottom thread protector.
 

COMBINABLE WITH

The SACT is combinable with all TTI open hole tools. The SACT is placed anywhere below the Gamma Ray/Spectral Gamma Ray (GRT) tools, but above the Phased Induction Tool (PIT).
 

REMARKS

The SACT should be run with inline centralizers.
 
For information on Parts, Test, Calibration and Accessory equipment available for the SACT-AB, contact your Tucker Technologies Technical Sales Representative

 

LOGGING PARAMETERS

 
Parameter
English
Metric
Vertical Resolution – Caliper
5.5 in
13.97 cm
Measurement Range:
  Caliper Radius
2.2in to 11 in (5.59cm to 28cm)
  Caliper Diameter
4.4in to 22 in (11.2cm to 56cm)
Maximum Logging Speed
60 ft/min
18.3m/min
Repeatability - Caliper
±0.05in, ±1.25mm
Borehole Ranges:
Minimum
6 in
15.2 cm
Maximum
22 in
56 cm
 

BOREHOLE ENVIRONMENT

Open, cased, fluid- or air-filled holes.
 This site and all material contained in it are considered confidential and may not be
reproduced in any form without written consent from TES.
© Copyright 2017 Tucker Energy Services  |  All Rights Reserved
Follow Us on...