DBA-BA
 Auxiliary Dual Laterolog Rigid Bridle Adapter
DBA-BA
Dual Laterolog
Rigid Bridle Adapter

DBA-BA.png

 
 
 PART No: 13000 – 4603

DESCRIPTION

 
The Rigid Bridle Adapter is used as an isolation current return for the Dual Laterolog (DLT). Constructed of four 16-foot sections, the top section has an electrode for voltage measurement and the bottom section contains the SP electrode. The middle two sections provide additional isolation.
 
 

SPECIFICATIONS

Parameter
English
Metric
Pressure
20,000 PSI
1,379 bar
Temperature
350° F
177° C
Weight
820 lbs
371.95 kg
Length of one section*
16.15 ft
4.92 m
Transport Length of one section1
17.96 ft
5.47 m
Tool OD
3.625 in
9.2 cm
1 From end of top thread protector to end of bottom thread protector.
 

COMBINABLE WITH

The DBA is used in combination with the Dual Laterolog Tool (DLT).

REMARKS

 
The number of sections required for log quality is determined by the make up of the tool string and borehole salinity.
 
*The DBA part number includes all four sections; the length of each section is 16.15 ft. For more information, contact your TTI service representative.
 
For information on Parts, Test, Calibration and Accessory equipment available for the DBA-BA, contact  your Tucker Technologies Technical Sales Representative.
 
 
 This site and all material contained in it are considered confidential and may not be
reproduced in any form without written consent from TES.
© Copyright 2017 Tucker Energy Services  |  All Rights Reserved
Follow Us on...